100 ampere 40V Transformer | Welding machine

We are make a 100 amp 40 volt shell type transformer.
You can also use it as a welding transformer or welding machine.
total weight of the transformer 40 Kg. Approx.

Material used for The Transformer :-
1. Silicon steel shell type core no- S9 ( Core Quantity 36 Kg.).
2. Primary wire 10no. (3.251mm) DCC Wire 1.6 Kg. (Double Cotton Covered Aluminium Wires)
3. Secondary wire 2no. (7.010mm) DCC Wire 1.4 Kg. (Double Cotton Covered Aluminium Wires)
4. Hard paper, Layer Paper, Insulating Varnish, Cotton Tape, etc.
5. 1.5 inch angle.
-------------------------------------
Some Video Link Here
-------------------------------------
Bobbin Making
   • How to Make Transformer Bobbin | Coil...  

How to calculate winding of transformer. Volt per turn.
   • 400 A transformer core binding | Tran...  

50 AMP Welding Machine
   • 50 Amp Welding Machine  

80 AMP Welding Machine
   • 80 AMP Welding Machine  

100 amp welding machine | How to make welding machine at HOME|DIY
   • 100 amp welding machine | How to make...  

400 amp welding machine
   • 400 amp welding machine  

220 amp welding machine restoration
   • 220 amp welding machine restoration