How To Program A 2017 - 2020 Chevrolet Tahoe Remote Key Fob - Add Lost Keys Programming Sync Pair

A step by step video on how to program a smart key remote fob to a 2017 - 2020 Chevrolet Tahoe.

If you already have at least two working remote key fobs for your Chevy Tahoe there is a shorter programming procedure than the one shown in the video that you can use. You can find those programming instructions here https://www.programyourremote.com/cla...

*This will only apply to Chevy Tahoe's that have a push button start ignition.

1. Using the driver's door, turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center(DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.

2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the ENGINE START/STOP button. (You may have to open and close drivers door to see the DIC display). The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.

3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. The DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the ENGINE START/STOP button. (You may have to open and close drivers door to see the DIC display). Remaining remote key fobs can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.

4. Place the new smart key fob in the transmitter pocket in the Tahoe center console .

5. Press the ENGINE START/STOP button. When the transmitter is learned, the DIC display will show that it is ready to program the next remote key fob.

6. Remove the smart key fob from the transmitter pocket and press unlock or lock on the transmitter.

To program additional smart key remote fobs, repeat Steps 4–6. When all additional transmitters are programmed, press and hold the Tahoe's ENGINE START/STOP button for approximately 12 seconds to exit programming mode.

This how-to video tutorial will show you how to program the smart key remote fob for the following Chevrolet Tahoe models:
2017 Chevy Chevrolet Tahoe ( LS, LT and LTZ )
2018 Chevy Chevrolet Tahoe ( LS, LT and LTZ )
2019 Chevy Chevrolet Tahoe ( LS, LT and LTZ )
2020 Chevy Chevrolet Tahoe ( LS, LT and LTZ )

More free DIY programming instructions available at https://www.ProgramYourRemote.com

Find a Locksmith in your area with https://www.LocateALocksmith.com