RV-10 Build Log - Emp 30 - Bending the rudder leading wedge

Описание к видео RV-10 Build Log - Emp 30 - Bending the rudder leading wedge

Bent leading edge skins in front of spar and riveting together. Used 1" PVC pipe (~1.3" OD) to impart curve in leading edge skin pieces. Per the plans, the pipe alone was not enough to put sufficient bend to complete the shape, so a smaller diameter broom handle was also used, and then the bend was completed by hand. Work was done in sections. Riveted together with blind rivets using new Harbor Freight pneumatic blind rivet tool, which worked well.

RV-10 Manual: Page 7-11, Step 2
Work Date: 3-20-2021

Комментарии

Информация по комментариям в разработке

Похожие видео