WLED Controller Build

This video walks through the assembly of a LED control box using Wasatch Pixels Quad+
pixel controller. I will be using this controller for my permanently installed puck lights that I
purchased from Your Pixel Store. I have utilized this WLED controller so that I can use
WLED and xLights. I will use xLights to control the lights during the Christmas season
where I run an animated light show using the wired Ethernet connection. During the rest of
the year, I will use WLED to control the lights using the WIFI network connection. The
materials to construct the box and where to find the parts is listed below.

WLED Wasatch controller:

From Wasatchpixels.com: https://wasatchpixels.com/product/was...

From Your Pixel Store: https://yourpixelstore.com/product/pi...
12v/

Control Box from Amazon:
https://www.amazon.com/dp/B08282SQPT?...

12 Volt DC fan:
https://www.amazon.com/dp/B07V6L6GGY?...

Pass through X-connect pigtails from Your Pixel Store:
https://yourpixelstore.com/product/re...

Ethernet connectors from Amazon:
https://www.amazon.com/gp/product/B09...
=UTF8&psc=1

PG9 cable Gland from Amazon:
https://www.amazon.com/gp/product/B06...
=UTF8&th=1

Bud Vents from Wired Watts: https://www.wiredwatts.com/ipv-1115

Temperature Controller from YPS: https://yourpixelstore.com/product/di...
and-temperature-controller-fahrenheit/

Power Cord from YPS: https://yourpixelstore.com/product/ac...

Wire Ferrules system from Amazon:
https://www.amazon.com/gp/aw/d/B07LCF...
k=4dd6466e78b3c88629ad1429183e42d6&hsa_cr_id=9340651260201&qid=1728154624
&sr=1-2-9e67e56a-6f64-441f-a281-
df67fc737124&ref_=sbx_be_s_sparkle_lsi4d_asin_1_title&pd_rd_w=v8yGa&contentid=
amzn1.sym.8591358d-1345-4efd-9d50-5bd4e69cd942%3Aamzn1.sym.8591358d-
1345-4efd-9d50-5bd4e69cd942&pf_rd_p=8591358d-1345-4efd-9d50-
5bd4e69cd942&pf_rd_r=FTHE0DHXNY6Y4326G0Z7&pd_rd_wg=axXuQ&pd_rd_r=db7005bf
-da01-4554-96ca-ba43a8a0eceb

Wires and screws came from local big box hardware stores
00:00 - Intro
00:24 - Controller Intro
03:13 - Box configuration summary
04:10 - Power Supply install
06:19 - Controller Install
08:31 - Wiring
09:60 - Controll Box penetrations
14:14 - Vent Install
15:45 - Fan install
16:48 - Ferrule install
19:13 - Back plate install in box
20:16 - Installing pass thorugh X-connects
20:56 - Final Wiring
23:23 - Temperature Controller Install
28:32 - Temperture Controller Operation
29:34 - X-connect wiring to Controller
31:58 - Ethernet Cable Assembly
35:26 - Completed Controller Review
35:53 - Final thoughts