Bose 802II and 302 bass with sp-24 digital processor clone 802c curve

In this video using sp24 bose dsp. In orfer to regenering the old bose controllers, because i have 3 802c controllers, but only one in perfect conditions.
I have two 802cII controllers in perfect conditions and a new in box digital panaray controller, but none of these have curve eq for 302 bass.
In the video I show the cloned curve of a 802c controller in the 2way pasive mode for using the system with only one amp and the internal crossover inside the 302 bass with outline for two 802II.
With the sp24 you also could use the bi amp mode for this system because the sp24 has stored the 802 series 2 full range curve, and you could hi passed this curve at 180hz for the hi channels for 802 and lowpassed at 180 for the 302 low channels and lower this bass channels in order of 7 or 8 dbs for leveling the two ways at same level of the 802c controller.
This is possible because the eq curve of 302 bass is the same that 802II under 180hz with a lowering of 8 db because 302 has more sensitivy obviously.
Other solution is using a analogue crossover setting it at 180hz in the out line of any bose controller with 802II full range curve for using this 802 and 302 system if you have not old 802c or have a defected one.