#4 Decor a circle by quilling - Trang trí hình tròn bằng giấy cuộn

Hello everyone,
The length of the strips that I used as the same as the length of A4 sheet, the width is 2 mm, you can use strips with a larger width.

I used a compass to draw a circle R4 with R=10 on A4 sheet, then the next circles are R3 with R=7; R2 with R=5; and 2 inner circles have R=2.5 (R1) and R=1.5 (R0) respectively. Besides, dividing the circle into 12 equal parts (You can use 30 degree triangle to divide).

At 00:29, I used a blue A4 strip to roll it up, then I used another dark blue strip to wrap around the outside, then place this in the center of the circle.

At 00:51 with circle R0, I used a piece of paper with a length equal to 1/4 of the quilling strip to roll it up, and covered it with a piece of blue (length = 1/4 of the quilling strip). Then I placed this one the center of this circle at the intersection of R0 and the line dividing the circle into 12 parts. Next, I used a piece of yellow paper (1:31) to roll it up, then release it, then bend it into a shape and place it in the position described in the video.

At 2:48, I used 5 strips (strip No. 1 and 5 are yellow, 3 strips are in the middle are blue) to overlap each other, then fold it into a zigzag and place it in the space between the center of the circle and R0.

At 5:35, I used 1/2 of the strip to continue rolling the circle with the same color as at R0 and placed the circle at a position so that the center of the circle coincides with the intersection between R1 and the line dividing the circle into 12 parts. Then I used a light blue strip to roll up (7:38) and placed it in circle 12 of the circular ruler, then shaped it and placed it in the position described in the video.

At 8:53, I used a blue strip with darker tone than the one used at the circle R1, also rolled it up and placed it in circle 10 of the circular ruler, then shaped it and placed it in the position described in the video. Continue doing this one with the strips of gradually darker tones and placed them at circle 12 of the circular ruler until the edge of R2. Then I used small pieces of yellow strip (about 1/8 the length of the quilling strip) (12:28) to placed it in the space between these layers of blue. At 13:27 I used a piece of strip with a length = 1/4 of the quilling strip to roll it up.

At 13:45, I used a quilling strip to roll it up and placed it in circle 14 of the circular ruler to create the shape described in the video. Here I used 2 different light and dark tones and placed them in the gap between R2 and R3.

For the gap between R3 and R4 (17:48), I used 2 yellow strips and wrapped a dark blue strip around it, rolled it up and placed it in the center. Then I used 2 light blue strips (19:48) and rolled them up and released them, placed them in circle 15, shaped them and placed them in the position as described in the video.

Next, the darker blue tones were rolled up and released and placed in circles 17, 19 and 21 respectively, shaped them and placed them at the position as described in the video.

At 22:50, I completed the gap between R3 and R4 with technical as described in the video.

Hope this video is helpful for you. Thank you for your watching/ liked/ subscribed/ Sharing.