How To Replace Window Regulator 2006-2011 Cadillac DTS

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-16-dJ

This video shows you how to install a window regulator on your 2006-2011 Cadillac DTS. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!

This repair was done on a 2010 Cadillac DTS Platinum 4.6L and the process should be similar on the following vehicles:
2006 Cadillac DTS
2007 Cadillac DTS
2008 Cadillac DTS
2009 Cadillac DTS
2010 Cadillac DTS
2011 Cadillac DTS

Tools you will need:
• Phillips Head Screwdriver https://trq.video/oiU-1AXAA00013
• Pocket Screwdriver
• 10mm Socket https://trq.video/ohn-1AXAA00017
• Trim Tool Set https://trq.video/ocU-1AXXX00006
• T25 Torx Socket
• Socket Driver
• Torque Wrench https://trq.video/oft-1AXAA00044
• Painter's Tape

Subscribe:    / @trq  

Check out our playlist:
Cadillac DTS 2006-2011 1st Generation:    • Cadillac DTS 2006-2011 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.