Скачать или смотреть I Built a Tiny E-Reader

I wanted to find out if it’s possible to build a tiny, fully functional e-reader completely distraction-free and small enough to carry everywhere.
So in this video, I’ll take you through every step. From understanding how e-ink works, to designing the case, solving the button mechanism, writing the firmware, and building a wireless upload system.

🧠 Want to build your own?
All print files, firmware, wiring diagrams, and step-by-step instructions is available on my Ko-fi page:
👉 https://ko-fi.com/s/e14ed892ea

Printer used: Bambu Lab A1

⸻

🔗 Materials & tools I used (Amazon – affiliate links):

• Heltec Wireless Paper (E-Ink + ESP32 module) → https://geni.us/FuG9 *
• 1500 mAh LiPo battery → https://geni.us/Gr6RG *
• PETG filament → https://geni.us/petgorigami *

Optional tools:
• Soldering iron → https://geni.us/SolderingKitFanttik *

⸻

🎥 My Video Gear:

• Sony ZV-E10 → https://geni.us/SonyZVE10Camera *
• Sigma 16mm f/1.4 → https://geni.us/Sigma16_14Lens *
• Hollyland Lark → https://geni.us/HollylandLarkMic *
• Godox SL60W Video Light → https://geni.us/GodoxSL60light *
• Softbox Set → https://geni.us/Softbox35 *

👉 Note: As an Amazon Associate, I earn from qualifying purchases. There’s no extra cost for you.

⸻

💡 Chapters:
00:00 Intro
00:13 Why not just buy a Kindle?
00:58 How e-readers actually work
02:15 Designing the case
03:48 Bringing it to life (firmware)
05:12 Bookmarks & power saving
07:20 Assembly & cost

⸻

#tinyereader #DIYereader #3dprintproject #einkdisplay #minimaltech #distractionfree #3dprinting #makerproject #PaulLagierProjects #buildityourself