Attaching a coaxial connector WITHOUT special tools! Quick method

The method shown here is quick and easy, buts it leaves a 1/4 in. washer on the cable. If this bothers you, check out my other video that shows an easy not so quick method.

   • Attaching a coaxial connector WITHOUT...  

Stuff you will need...
- 1 scrap 2x4 board about a foot long
- 2 scrap 2x4s 4 inches to foot long (They are used to raise the foot long board off the table.)
- 1 scrap 1x4, 3 to 5 inches long
- 1/2 in. drill bit
- 1/8 in. drill bit
- One 1/4 in. washer
- compression type coaxial connectors (bought mine off of amazon - link to product http://amzn.to/2CqjIgg)
- coaxial cable (I used old cable that Dish left behind when we canceled our service years ago)
- drill
- side cutters, heavy duty scissors, or a sharp knife
- ruler


Disclaimer: All products used in this video were purchased by me and all video content is my own and has been edited by me, Matthew Fox.

Note: Filmed using a Samsung WB250F