Скачать или смотреть Repair a plug not holding well in the wall 1/2: plein wall

#1/2. Isn't it very annoying not being able to easily unplug your vacuum cleaner ? Plugs not holding well in the wall can irritate you, but worse than that, they can be a serious electrical risk ! This fix can be done by anyone !

Chapters
0:00 Intro
0:15 The problem
0:45 How to dry a roll of paper tissues
1:11 Specific situation of plein walls

The fix
2:15 Cut the power of the plug
2:52 Power test (this time with a lamp instead of the radio !)
3:39 Remove the plug's safety cap
3:50 Unscrew the screws holding the plug
4:19 Here, the specific case of plaster impeding the straight placement of the plug
4:41 Remove the plug from the wall (not really necessary but it helps you for being sure how to proceed)
5:30 Put the plug back into the wall and tighten the holding screws
6:27 Put the safety cap back (here an old model. Today, the cap is installed directly on the main plug being already in place)
6:56 Switch on the power for the plug's circuit
7:20 Conclusion

***

As to animals, no much this time, you will see the dog passing by once in front of the plug.

Version française disponible ici:
   • Réparer une prise qui tient mal 1/2:  murs...