Spektrum DXS Binding to BNF Models | E-flite Viper 70mm EDF Jet

Stock bnf
6s spectrum 3200 30c
DXS transmitter
#aviation #rcplane #shorts

no programming!

1.stick the bind plug in your BNF model receiver
2.stick the battery inside the esc (turn model on)
3.make sure the orange light flashes in the RX
4.take out the bind plug while it's flashes
5.hold the bind button and turn on your DXS Transmitter
6.model should start binding with Safe Select On

you will only have stabilization mode(SAFE) no as3x.

1.To put safe select on a switch so you can have safe and as3x you have to hold both Transmitter sticks to the inside bottom corners, and toggle the desire switch (channel 7) 5times quickly (1 toggle = full up and down ).

2. control surfaces should start moving and you should have both safe and as3x on the switch you chose (channel 7).

3. on the DXS Transmitter make sure to choose a switch that doesn't do anything , like channel 7 . I advise you to put the safe select on that channel ! Cheers 🥂

jet - https://www.horizonhobby.com/product/...

transmitter - https://www.horizonhobby.com/product/...

battery - https://www.horizonhobby.com/product/...

servo reverse cable - https://www.amazon.com/Servo-Signal-R...