How to Replace Front Caliper 2008-2010 Ford F-250

Buy Now!
New Brake Caliper from 1AAuto.com http://1aau.to/ia/1ABCR00262

This video shows you how to install a front brake caliper on your 2008-2010 Ford F-250. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.

This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• Pry Bar http://1aau.to/oJZ/1AXAA00020
• 14mm Wrench http://1aau.to/oMG/1AXAA00010
• 16mm Socket http://1aau.to/oa7w/1AXAA00015
• 21mm Socket http://1aau.to/o4D/1AXAA00043
• 22mm Socket http://1aau.to/omv/1AXAA00266
• Pliers
• 1/2 Inch Impact Gun http://1aau.to/oot/1AXAA00252
• Torque Wrench http://1aau.to/oaoP/1AXAA00044
• Brake Grease
• Gloves http://1aau.to/oC4/1AXSS00048
• Safety Glasses http://1aau.to/owL/1AXAA00343
• Floor Jack http://1aau.to/oR8/1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.