How to Replace Axle Seal 2007-2013 Chevrolet Silverado 1500

Buy Now!
New Axle Hub Gasket from 1AAuto.com http://1aau.to/ia/DMAXX00006
New Axle Hub Gasket from 1AAuto.com http://1aau.to/ia/MPDMK00010

This video shows you how to install an axle seal on your 2007-2013 Chevrolet Silverado 1500. This seal is for the end of a solid axle tube, to keep gear oil in, and the elements out. A leaking seal could lead to considerable damage to your differential. Or, if you needed to remove an axle, or a bearing, or do maintenance on a differential, you should install a new seal when you put things back together.

This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obcL/1AXAA00013
• Pry Bar http://1aau.to/oNL/1AXAA00020
• 14mm Wrench http://1aau.to/oRA/1AXAA00010
• 17mm Wrench http://1aau.to/oRA/1AXAA00010
• 14mm Socket http://1aau.to/obhz/1AXAA00015
• 15mm Socket http://1aau.to/obhz/1AXAA00015
• 16mm Socket http://1aau.to/obhz/1AXAA00015
• 22mm Socket http://1aau.to/ono/1AXAA00266
• Axle Fork
• Bearing Race and Seal Driver http://1aau.to/oy/1AXAA00038
• Dead Blow Hammer
• Trim Tool Set http://1aau.to/o4M/1AXXX00006
• Torque Wrench http://1aau.to/oavN/1AXAA00044
• Gloves http://1aau.to/oNT/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oWs/1AXAA00068
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014:    • Chevy Silverado 2nd Generation 2007-2014  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.