Скачать или смотреть Fiber laser Beam nozzle centering adjust

The fiber laser nozzle beam centering method involves adjusting the position of the laser beam to ensure it is centered within the nozzle, which is crucial for optimal cutting and marking performance. Here are some steps to achieve beam centering:

1. *Visual Inspection*: Look through the nozzle to visually align the beam with the center of the nozzle.

2. *Beam Profiler*: Use a beam profiler to measure the beam's position and size, adjusting the nozzle until the beam is centered.

3. *Camera Alignment*: Use a camera to capture an image of the beam exiting the nozzle, then adjust the nozzle to center the beam.

4. *Beam Centering Tool*: Utilize a beam centering tool, which projects a target onto the nozzle, allowing for precise beam alignment.

5. *Laser Beam Alignment*: Adjust the laser beam's position using the laser's built-in alignment controls or external mirrors.

6. *Nozzle Adjustment*: Fine-tune the nozzle's position using adjustment screws or mechanisms.

7. *Verification*: Confirm beam centering using a beam profiler or scotch tape.

By following these steps, you can ensure accurate beam centering, resulting in improved cutting and marking quality, reduced waste, and extended nozzle lifespan.