[How to Use 3] Hydra Aqua Peeling F Machine 7 in 1 Tutorial Screen | h2o2 Facial Machine

Hi there!
In this tutorial we’ll explain how to use your Hydra Oxygen Facial Machine h2o2
Watch the video and see the description below to see how each tool works

0:00 Introduction
0:23 Skin Scrubber
0:45 Cavitation
1:05 RF
1:25 LED MASK
1:56 ABRASION
2:19 COLD HAMMER
2:37 SPRAY GUN
2:50 TIME
2:59 H2O2

Skin Scrubber, Cavitation, Radiofrequency, Led Mask, Abrasion, Cold Hammer and Spray Gun
The first four tools, skin scrubber, cavitation, radiofrequency and led mask, offer the same functions
While the abrasion pen, cold hammer and spray gun are simpler and similar among each other.

0:23 Skin Scrubber
1 Set the intensity you’d like to work with. We recommend starting with low intensity.
2 Select the working mode: continuous or intermittent
3 Start the treatment (You can change the intensity or working mode if necessary )
4 Turn off the handle once the treatment is over.

0:45 Cavitation
This tool works similarly as you can set its intensity and working mode and change them during the treatment.
You can also turn it on and off using both, the handle or the screen.
Turn off the handle once the treatment is over.
Remember to set the machine on 0 before turning it off.

1:05 RF
The radiofrequency tool is used in the same way. Adjust its intensity and working mode from the handle or the screen and adapt the treatments to suit your needs.
Again, remember to set the handle on 0 before turning it off.

1:25 LED MASK
The intensity of the led mask can be set in the same way as the other tools, but its working mode is different.
There are two options:
Flash mode- the light changes its color constantly
Color mode- the color changes manually every time you press the button. Red, green, blue, yellow, violet, cyan, white and start all over again.
You can start this tool and turn it off using the screen

1:56 ABRASION
Use the abrasion pen with the following knobs: water - air - liquids
We recommend starting the treatment by setting the water flow and air suction at minimum or medium intensity and selecting the bottle you want to use.
You can start and turn off the abrasion pen using the touch screen or by pressing the button in handle

2:19 COLD HAMMER
select this tool on the screen or just press the button in the handle.
Wait for a couple of minutes until the tool is cold enough to start the treatment.
Make sure the vents are not obstructed
Turn it off when the treatment is over.

2:37 SPRAY GUN
This tool can also be set from both, the screen or the handle.
Use it with the vial pointing upwards.
Store it with the vial pointing downwards.

2:50 TIME
You can also set the time of the treatment with the correspondent buttons either before or during the treatment.

2:59 H2O2
Press the H2O2 button to sanitize the water of tube D with its blue light. You can use it and stop it whenever you want.

Purchase link: https://bruunbeauty.com/Hydra-Tutorial

Visit our website www.bruunbeauty.com
PROMO CODE: INSTA10 ✨
GET 10% OFF discount using this promo code in our store.