How to Replace Rear Brakes 2007-13 Toyota Tundra

Buy Now!
New Brake Rotor Set from 1AAuto.com http://1aau.to/ia/1APBR00996

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2007-13 Toyota Tundra.

• Check here for more videos on the 2007-Present Toyota Tundra:    • Toyota Tundra 2nd Generation 2007-Pre...  

This process should be similar on the following vehicles:
2007 Toyota Tundra
2008 Toyota Tundra
2009 Toyota Tundra
2010 Toyota Tundra
2011 Toyota Tundra
2012 Toyota Tundra
2013 Toyota Tundra
2014 Toyota Tundra
2015 Toyota Tundra
2016 Toyota Tundra
2017 Toyota Tundra
2018 Toyota Tundra
2019 Toyota Tundra
2020 Toyota Tundra
2021 Toyota Tundra

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/ojy/1AXAA00013
• Pry Bar http://1aau.to/ocn/1AXAA00020
• Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/oh/1AXAA00288
• 1/2 Inch Air Impact Gun http://1aau.to/oao/1AXAA00252
• Socket Driver
• Swivel
• Torque Wrench http://1aau.to/ofR/1AXAA00044
• Brake Grease
• Copper Anti-Seize
• Paper Towels http://1aau.to/oa5/1AXSS00035
• Rust Penetrant
• Floor Jack http://1aau.to/ocR/1AXAA00068
• Hammer http://1aau.to/oco/1AXAA00091
• Jack Stands http://1aau.to/ocC/1AXAA00065
• Wheel Chocks
• Wire Brush http://1aau.to/oaA/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Toyota Tundra 2nd Generation 2007-Present:    • Toyota Tundra 2nd Generation 2007-Pre...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.