How To Replace Upper Engine Oil Cooler Inlet Hose 1992-99 GMC K1500

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/120/f/engine-oil-coo...

The oil cooler inlet hose brings hot oil to the cooler until to be cooled off. A clogged line that restricts flow could result in over temperature oil. A rusted or cracked line will cause leaks. This video shows you how to install a new inlet line on your 1992-99 GMC K1500.

• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra:    • GMC K1500 Sierra 1988-1999 4th Gen  

This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500

Tools you will need:
• 21mm wrench
• 13mm Socket http://1aau.to/ojm/1AXAA00015
• 15mm Socket http://1aau.to/ojm/1AXAA00015
• 18mm Socket http://1aau.to/od4/1AXAA00043
• Channel-Lock Pliers http://1aau.to/o8/1AXAA00139
• Needle nose pliers http://1aau.to/obj/1AXAA00051
• Needle nose pliers http://1aau.to/obj/1AXAA00052
• Oil Filter Wrench http://1aau.to/oj/1AXAA00026
• Straight Cutters
• 1/2 Inch Air Impact Gun http://1aau.to/oap/1AXAA00252
• Ratchet http://1aau.to/oko/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/ojm/1AXAA00015
• Gloves http://1aau.to/oaN/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/oaz/1AXAA00343
• Drain Pan http://1aau.to/oaP/1AXAA00320
• Floor Jack http://1aau.to/ocS/1AXAA00068
• Hammer http://1aau.to/ocp/1AXAA00091
• Jack Stands http://1aau.to/ocD/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen:    • GMC K1500 Sierra 1988-1999 4th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.