Скачать или смотреть The TV-B-Gone: Make it in 30 minutes!

You just have to be careful about few details:
1 - There are 4 NPN + 1 PNP transistors. Identify the PNP and separate it from the crowd.

2 - Start soldering lower parts first like resistors, end up with the higher ones.

3 - If you don't intend to mess up with the micro-controller programming in the near future, don't need to solder the 6 pin connector: it may bother your palm or fingers while you hold it or use it.

4 - Be careful when planting the touch push-button. Use the tweezers as in the video. Then you should TV-B good to go!

5 - BTW, I placed a copy of the assembling manual on google drive: https://drive.google.com/file/d/18b8_...

6 - To order the kit you can look here:
https://www.adafruit.com/product/73
or here:
https://abra-electronics.com/educatio...
Note: to see it in action you can also go: https://learn.adafruit.com/tv-b-gone-kit
Good luck and keep me posted!
CU