Скачать или смотреть Gull Wing INSTALL VIDEO #5 Prep to Re-Join Frame

PREP TO: Join Frame Back Together

Insert the yodaTEQ Gull Wing Hatch System into the outer slot of the run channel (the rubber seal) inside the aluminum frame (closest to the outside of the vehicle)

Join the aluminum frame where you made your cut and place the 4 hole joining plate on the outside as a template to mark the 1/8" holes

Keep in mind that the 4 hole joining plate will be placed on the inside of the inter tract closest to the interior of the vehicle

Once you have marked the placement of the 4 holes remove the yodaTEQ Gull Wing Hatch System from the aluminum frame

Drill the 4 holes by marking the position with a center punch and drill (4) 1/8" holes for your 4 hole joining plate

-------------------------------------------------------------------------------------------

*The Gull Wing System in the install videos was used for VIDEO ONLY and is NOT the production version.

The production version comes complete with Molle Panels
For more information regarding this product go to www.yodaTEQ.com or Call 714-510-0770

Instagram.com/yodaTEQ • Facebook.com/yodTEQ