Скачать или смотреть Practical Introduction to Avionics | How to: Electronics

Not only you'll be able to make rockets but any robot you want. You just need to have enough patience–to watch this video lecture & follow it and do it hands-on.

(I'd highly appreciate it if anyone could do the timestamps!)
Near the end of the lecture, there was a part where I wasn't able to do the vias in Fusion360 electronics. Actually, Fusoin360 Electronics automated the process of making via holes. While tracing a path if you simply go to the top and change the layer(let's say you were at the top but then you changed to the bottom) then wherever you click first, a via hole will be automatically placed there, and then you can continue tracing in that layer. Similarly, you can come back to the top layer again.

Book Recommendation: The Art of Electronics by Paul Horowitz Winfield Hill

If not the whole book then at least understand the following:
1. Resistors, capacitors, inductors, diodes, and transistors
2. Serial Communication Protocols: SPI, I2C, UART
(   • PROTOCOLS: UART - I2C - SPI - Serial commu...  )
3. Pull Up, Pull Down resistors
4. Watch the "Full STM32 KiCad tutorial" on Phill's Lab YouTube channel.
(basically, make something using STM32 as that chip has a really active community around it)
5. Sign up on the STM Electronics website to install STMcubeIDE. For reference use this document: (https://www.st.com/resource/en/applic...)
______________________________
Fusion360 is incredibly vast to learn and just as powerful!
I'll also cover stress & thermal simulations in fusion360 while working on incredible projects, so subscribe!

I continued work on this PCB in this live stream: https://www.youtube.com/live/cnuqnooYVP4