My first Bandsaw Owl

ATTENTION: This video is not a sawing guide and it is recommended NOT TO IMITATE such working techniques
This video is only meant to show my creativity.
The safety instructions and operating instructions of the machine manufacturer are to be observed.
All band saws pose a high accident risk if you lead a workpiece carelessly.
The working technique and the movement processes must harmonize in line with the band saw.
With larger band saw blades increase bandsaws the risk of injury.
Imitations done at your own risk!
Experience has shown that the best way to saw is when the piece of work rests correctly and is guided safely
Liability of any kind, in particular personal injury and property damage, is excluded.
Now I wish you enough curiosity to watch - until the end of this video

Thanks for watching

Can you saw an owl out of a piece of wood with a band_saw?
Info: Technical data of my #Bandsaw see here [Werbung]: https://www.dictum.com/de/elektrowerk...

Maybe similar to a chainsaw artist?
I think so, but you need a lot of imagination to sawed a #3D_owl on a band saw.
Because with two saw cuts, as it is possible with the example of my
- cats(   • Einfache Katzen Schnitzrohlinge an de...  ),
- elk/ reindeer(   • Scroll Saw 3D reindeer 2_2_1  looking...  ),
- lamas(   • Mein 3D Lama 2018  ) or
- giraffe(   • 670. Wie ich eine 3D Giraffe säge + Z...  ), one does not get further.
Even another cut from a third perspective didn't help me with my first attempt.
I had to make a lot of additional cuts until the approx. 2 inch small owl was easily recognizable.
But take a look for yourself: this video shows how I sawed this 3D owl in about 1/2 hour.