VAUXHALL MERIVA B ELECTRIC HAND BRAKE PARK BRAKE SERVICE MODE

VAUXHALL MERIVA B ELECTRIC HAND BRAKE PARK BRAKE SERVICE MODE
Patreon
  / baconbuttties  
Paypal
https://www.paypal.com/paypalme/bacon...

PLEASE READ.....................................................
Put the rear brake calipers into "service mode"

Put the gear into Neutral or P.
Turn ignition on with engine off.
Press brake pedal a few times until servo vacuum is empty.
Press the brake pedal and the Park Brake switch down until the orange service lamp flashes.
Keep brake pedal depressed
Release and re-press the Park Brake switch for approx. 5 secs until the orange service light goes off.
Release the Park Brake switch and brake pedal simultaneously, the orange service lamp begins to flash and the Park brake motor should fully release.
You should hear a noise as it happens.

IGNITION OFF! WHILE CHANGING BRAKES.

The rear calipers should now be in service mode allowing the pads to be replaced.


Turn-Off "service mode"

Put the gear into neutral or P.
Turn ignition on with engine off.
Pull the Park Brake switch and press the brake pedal simultaneously until the orange service light goes off and the rear caliper drives out.