Harvey Alpha HW110S-36PG Table Saw with Big Eye Fence System - Unboxing & Assembly

Join us in our unboxing and assembly of the Harvey Alpha HW110S-36PG featuring the Big Eye Rip Fence System and the Compass MG-36PRO Miter Gauge!

Subscribe for more woodworking tips and safety tutorials from the Harvey Team.

Harvey Alpha HW110S-36PG Table Saw Instruction Manual: https://harveyedu.com/wp-content/uplo...

Big Eye Instruction Manual: https://harveyedu.com/wp-content/uplo...

Compass MG-36PRO Miter Gauge Instruction Manual: https://harveyedu.com/wp-content/uplo...

https://www.harveywoodworking.com/
https://bridgecitytools.com/

Support: https://harveyindustriesintl.freshdes...

Chapters
00:00 - 00:20 Intro
00:21 - 00:33 General Safety Instructions
00:34 - 03:17 Unboxing the HW110S-36PG Cabinet Assembly
03:18 - 03:35 Installing the Handwheel Handle
03:36 - 05:50 Installing the Blade
05:51 - 08:44 Installing and Leveling the Table Insert
08:45 - 10:06 Aligning the Table T-slot Parallel with the Blade
10:07 - 11:02 Tensioning the Motor Belt
11:03 - 11:19 Installing the Motor Cover
11:20 - 13:54 Installing the Extension Wings
13:55 - 14:22 Unboxing the Big Eye Fence System
14:23 - 17:11 Packing List
17:12 - 18:29 Front Guide Rail Mounting Hardware
18:30 - 19:50 Front Guide Rail Installation
19:51 - 20:33 Installing the HW110S-36PG Extension Table
20:34 - 21:24 Installing the Rear Rail (Saws Without Pre-drilled Holes)
21:25 - 21:54 Installing the Rear Rail (Direct Installation)
21:55 - 22:50 Installing the HW110S-36PG Extension Table Legs
22:51 - 24:10 Installing the Connecting Rod Assembly
24:11 - 27:33 Installing the Fence Assembly
27:34 - 29:11 Adjusting Slider and Guide Rail Compatibility
29:12 - 29:35 Fine-tuning the Front Locking Force
29:36 - 30:40 Fine-tuning the Rear Locking Force
30:41 - 31:00 Fine-tuning the Fine Adjustment Knob
31:01 - 32:11 Setting the Fence Extrusion Height
32:12 - 35:34 Calibrating the Fence Perpendicularity
35:35 - 38:01 Calibrating the Fence Parallelism
38:02 - 39:42 Calibrating the HIGH and LOW Stops
39:43 - 40:20 Using the Flip Position Stops
40:21 - 41:26 Installing the Power Switch
41:27 - 45:53 Aligning the Riving Knife with the Blade
45:54 - 47:16 Installing the Dust Outlet
47:17 - 49:19 Installing the Blade Guard and Extraction System
49:20 - 55:19 Compass MG-36PRO Unboxing and Assembly
55:20 - 55:55 Outro