Adjusting the Rollers on Your Anlin Sliding Patio Screen Door | Anlin Windows & Doors

If your screen door is hard to slide while opening and closing, the rollers may need to be adjusted.

Open the screen door slightly and look at the reveal or gap between the screen door and the frame.

The roller adjustment screws are located on both ends at the bottom and top of the screen door.

Use a Philips head screwdriver to adjust the roller adjustment screw. Do not use a screw gun and be careful not to strip the screw.

Turn the roller adjustment screw clockwise to raise up the screen door. Turn the roller adjustment screw counterclockwise to lower down the screen door.

Continue making adjustments until the gap or reveal between the screen door and the frame is even from top to bottom. Adjust the other roller adjustment screw if needed.

Check to see if the screen door is sliding smoothly. Repeat these steps if further adjustment is needed.

https://anlin.com/care-maintenance/

#AnlinWindows



Music: http://www.playonloop.com/2013-music-...