Unboxing SPI Matrix - Art-net to SPI converter

SPI Matrix lite can be controlled by Art-Net, DMX or can operate in stand-alone mode. The maximum of programmable RGB / RGBW LEDs is 1024 RGB / 768 RGBW LEDs, which are 6 full Art-net universes. There are 4 SPI LED outputs. The maximum of RGB LEDs per Output is 1024/768 (6 Art-net universes per one SPI Output).

Required Input is 5-24V/ 0.3A (PCB only, without the LED strips / LED pixels) and maximal current is 10 A. Power connector and SPI out connector is standard 4 pin terminal with 5mm contact spacing e.g. SH04-5-GYLED.

SPI Matrix supports the most common connectors such as RJ-45, XLR in/out and SPI connectors for your LED strips. You can also find a slot for SD-Card, DIP switch and buttons for control in stand-alone mode. An optimal SD card is Micro SD Card (FAT32, up to 32 GB).

We now offer 6 Art-net universes and a discount on this great controller. Visit the link below:
https://ledstrip.studio/spi6universes...

LED Strip Studio is brand dedicated to development of progressive LED technology, LED controllers and LED accessories. We truly have strong tradition of successful projects and happy clients all over the world. Something about the merest beginning of this brand, achievements, and aborts also, you can find on our blog

BLOG - https://ledstrip.studio/go-to-blog

PAGE - https://ledstrip.studio/visit-us

Follow us on:
FACEBOOK -   / ledstripstudio  
INSTAGRAM -   / ledstripworld  
TWITTER -   / ledstripstudio  

#ledstripstudio

Any questions? 👀 Let us know in the comment section!

email: [email protected]
phone: +421 220 283 002