DIY SEATMOVER - Windshield Wiper motors Arduino IBT-2 Simtools MOD your static SIM RIG with Motion!

On a lot of forums and Facebook pages, Sim Racers want a motion rig but they are very expensive. In this video I am showing them how they can modify their existing static rig for motion using cheap windshield wiper motors, Arduino, IBT2 motor controllers and software like SMC3 and simtools. This is part one of two.

So to be clear, I am showing you how to modify your static rig for motion. This video is the first part the most complicated part, the second video will be so easy because it's just physical stuff..

When I was building my motion rig, I looked on the internet everywhere for a video guide on how to how do it how all these different components and stuff hook together but I couldn't fine one.
So that's what this video is going to be. We're going to take two motors and connect them together with some hardware and some software and we're going to make a seat mover. seat mover seat mover

take your basic sim frame - wheel, pedals. were going to add a U-joint for side to side turning or back and forth for acceleration and braking.

we're going to use two motors and an Arduino uno and IBT-2 IBT2 motor controllers.
The hall effect potentiometers connect to the motor shaft to read the position of the motor. The position of the potentiometer sends a reading back to the Arduino so it knows what position the motor is in.

The equipment we need windshield wiper motors we need two of the motors to make the motion. The motors are controlled by these IBT-2 motor controllers.. All are controlled by the Arduino uno or an Arduino uno clone. The last thing we need are hall effect potentiometers.

There are thousands of windshield wiper motors and the big difference between industrial type motors and windshield wiper motors is that windshield wiper motors have some type of ground which connects to the car chassis of the car and we have to get rid of that or we will short our IBT-2 to ground.

You can go to xsimulator.net for more information. But if your motor is a 5 wire motor like this it has Low speed, a high speed, a ground, 2 parking connections.

Connecting to a 12V battery to see if the motor actually works before we modify it.
00:00 start
04:00 electrical parts needed
06:00 isolating ground on windshield wiper motors
17:00 building test stand for motors
23:00 hall effect potentiometer mounting
27:00 wiring diagram wire it up
30:00 SMC3 utility and upload to arduino
42:00 it's working

Sir Spats Gaming Channel 11k subscribers
   / @sirspatsgaming  

MUSIC on the video.. Some I have paid for, some is copyright free.
-----------------------------------
Track: Perseverance — Land of Fire [Audio Library Release]
Music provided by Audio Library Plus
Watch:    • Perseverance  — Land of Fire | Free B...  ​
Free Download / Stream: https://alplus.io/perseverance
//// Music with video///
Racing music Licensed Purchased from :
www.hooksounds.com/royalty-free-music/racing/1379488 Racing by HookSounds
----------------------------------------
Happy Life by Fredji
SC:   / fredjimusic​  
FB:   / ​  
Promoted by MrSnooze    • Background Music for Vlogs I Happy, U...  
////////
other paid music track snips from VIdeocopilot.net
EPIC music and ProScores.

50:1 12volt motors just search Ebay for GEAR MOTOR 12 VOLT GREAT FOR SAWMILL/CRAB POT PULL/FEED/SIMULATOR 75-80RPM 50:1 (sold by PGSAW in Canada)

Hall Effect Potentiometers DIGI-Key and others PN 987-1392-ND
https://www.digikey.co.uk/en/products...

Arduino UNO R3 - amazon. I have also used the cheaper ELEGOO clone.
https://www.amazon.com/Arduino-A00006...

IBT-2 motor controllers up to 43amps (which is a lot!)
https://www.amazon.com/dp/B00WSN98DC?...

other motor controllers you could consider using are JRK12V12 or Sabertooth but I use IBT-2's

XSIMULATOR forum - Info specifically for arduino/IBT-2 for 1 to 3 Motors. You can use up to three motors per arduino. But you each motor needs it's own IBT-2 controller.
https://www.xsimulator.net/community/...

DMAX motion sim build posts on XSimulator
https://www.xsimulator.net/community/...