How to Replace Upper Control Arms 2006-10 Dodge Charger

Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASFK00636

You may be surprised to hear you need to replace a control arm, especially if the vehicle is never driven hard, or has been in an accident. More often than not, the arm is in fine condition, but the bushings or ball joint have worn out, causing noise, play in the wheel, or other unsafe conditions. This video shows you how to install a new TRQ upper control arm in your 2006-10 Dodge Charger.

• Check here for more videos on the 2006-10 Dodge Charger:    • Dodge Charger 2006-2010  6th Generation  

This process should be similar on the following vehicles:
2006 Dodge Charger
2007 Dodge Charger
2008 Dodge Charger
2009 Dodge Charger
2010 Dodge Charger

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/okW/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/ocP/1AXAA00020
• 18mm Socket http://1aau.to/oeM/1AXAA00043
• Ratchet http://1aau.to/omE/1AXAA00016
• Torque Wrench http://1aau.to/ogN/1AXAA00044
• Liquid Thread Locker
• 6mm Allen Wrench http://1aau.to/ov/1AXAA00007
• Hammer http://1aau.to/ocV/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Dodge Charger 2006-2010 6th Generation:    • Dodge Charger 2006-2010  6th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.