Oven Repair Dacor CPS227 Error Code F1 & F0 Relay Board & Control Board Removal

Recently after using the broil function on our Dacor CPS227 oven. The oven threw 2 error codes: F1 & F0. In doing so the oven would not turn off. (NOTE TO SELF DON'T USE BROIL OR SELF CLEAN ON OVENS)

In this video, I show the steps I took to remove the relay and control boards. The boards were sent out to be repaired.

I sent the boards to Circuit Board Medics, in Greenville SC. The cost to repair, 2 relay boards and 1 control board was $369.99. Your board repair cost , might differ. The turnaround time from Circuit Board Medics was just a quick couple days.

Hopefully this will give you the general idea for your oven, enough if it is not a Dacor oven.
Pretty straight forward removal. No big surprises.

The tools used for my removal were:
Needle nose pliers
#2 Phillips Screwdriver
5/16" socket
Multi-meter
Flashlight

***** WARNING, REMEMBER WHEN WORKING AROUND ELECTRICITY. BE SAFE AND MAKE SURE THE POWER IS OFF BEFORE STARTING.*****