Скачать или смотреть Building Your First Circuit || Basics of switch || Hardware design

Learn the Fundamentals of Circuit Simulation with Falstad! ⚡️

In this tutorial, we walk through the step-by-step process of building a basic DC circuit from scratch using the Falstad interactive circuit simulator. Whether you are a student, a hobbyist, or just curious about electronics, this video will help you visualize how electricity flows through components.

We cover how to place a voltage source, add resistance, and use a switch to control the flow of current. You’ll also see how to use "Scopes" to monitor real-time voltage and current fluctuations.

📍 What You’ll Learn:
How to navigate the Falstad interface.

Placing and connecting components (Voltage Source, Resistor, Switch, and Ground).

Visualizing current flow using the "Yellow Dot" animation.

Setting up Scopes (Oscilloscopes) to graph circuit behavior.

The difference between an Open Circuit and a Closed Circuit.

⏳ Timestamps:
0:00 – Clearing the workspace and introduction

0:15 – Adding the 5V Voltage Source

0:25 – Placing the 1kΩ Resistor and wiring

0:45 – Adding an SPST Switch and Grounding the circuit

1:10 – Setting up real-time Scopes for current and voltage

1:50 – Toggling the switch and analyzing the results

2:20 – Final circuit demonstration

🛠️ Components Used:
Source: 5V DC

Resistor: 1k Ohm (used to limit current)

Switch: SPST (Single Pole Single Throw)

Reference: Ground (0V)

🔗 Resources:
Try it yourself: falstad.com/circuit

If you found this tutorial helpful, please hit the Like button and Subscribe for more electronics and simulation guides!

#Falstad #CircuitSimulation #ElectronicsTutorial #DCCircuits #Engineering #STEM #Physics #CircuitDesign #ElectricalEngineering #LearnElectronics #science

Search-Specific Phrases
How to simulate a circuit online

Understanding open and closed circuits

Falstad circuit simulator beginner guide

Interactive electronics tutorial

Circuit design for students