oberon clutch slave install 2020 husqvarna 701 enduro lr

Installing the oberon clutch slave on the 2020 Husqvarna 701 enduro LR is a must. A key weakness of the 2020 Husky 701 LR is the clutch slave o ring. It can leave you stranded. Installing the Oberon clutch slave is the best way to create reliability without giving up the smooth clutch feel of a hydraulic clutch. While I'm at it, I will be adding a billet case saver from NiceCNC for peace of mind and much better off-road mud management. The OEM sprocket cover is a mud collector that just needs to go. The new unit is strong and light and looks great. Both are necessary upgrades that will help turn this 2020 Husqvarna 701 enduro LR into what could be the ultimate adventure bike without going full blown Rally conversion. The goal here is to build a bike that can go anywhere and do anything...better than my GS or other 400-500 pound adventure bikes that are so popular these days. ...Well at least that's the goal of the 30 plus modifications that are planned for this Husky 701 enduro.

I hope this video is helpful, I'm always delighted to get your questions comments and feedback.
Remember you can also find me at https://dualsportgarage.com/
Thanks for watching!

Part: Oberon Clutch Slave Cylinder: https://sovrn.co/1cok7sr
Part: NiceCNC Sprocket Cover Case Saver Protector For Husqvarna 701 Enduro & SM 16-20 available at the following link: https://amzn.to/40nlGZU

Tools:
Torx 20 Driver, Torx 25 Driver, Torx 27 Driver
8mm Wrench, 11mm Wrench
8mm Socket, 10mm Socket

Note: I received no free product and I was not paid to make this video. However this channel is subsidized in part by small commissions paid on some product links. So it is helpful and very much appreciated when you use these links to support this channel.