DIKO SOL50 - Silicone Oil Emulsifier ( How to make Silicone Oil 350 Cst soluble in water )

A very simple method of making Silicone Oil 350 Cst Viscocity Soluble in water using our emulsifier DIKO SOL50 .

Fenton Chemicals is one of the largest manufacturer of emulsifier for Silicone oil in the world.

This video is uploaded by Fenton Chemicals Technical Team.

Arpit Jain, who is a Chemical Engineering Graduate from IIT Varanasi (Banaras Hindu University) is the Director of Fenton Chemicals based in Indore, M.P , India.
You can contact us for more details on this product at below addresses :-
Website :- www.fentonchemical.com , www.fentonchemicals.com ,
Email - [email protected] ,
Mo – 9479854613 (Akshay Jain) , 9098620999 (Arpit Jain).

Product:
Single component emulsifier DIKO SOL50 for making silicone oil water emulsion.

Introduction:

Since these oils widely vary in composition depending on the geography and method of extraction, only our company provides single component emulsifier that can serve all types of oil due to our in depth research and development .

This single component emulsifier offers complete flexibility to match all compositions of Silicone oils.

Dose:
The total dosage of our emulsifier DIKO SOL50 to make silicone emulsion is 10-15% depending on the concentration of the active silicone oil used.

Method of use:

1] Take 20 kg Silicone Oil 350 Cst.
2] Now add 10 kg Silicone oil emulsifier DIKO SOL50 to it.
3] Mix the solution well using a good stirrer of 1500 rpm .
4] Now add 2 kg water and stirr for 5 mins.
5] Now add 5 kg water and stirr for 10 mins.
6] Now add 10 kg water and stirr for 10 mins.
7] Keep adding water step by step upto 100 kg total while stirring continuously.
8] You will notice a good milky white silicone emulsion is formed.
9] We have prepared a 30% Solid Silicone Oil Emulsion which can be used in various applications as per the requirement.