ComAp ats controller | Automatic Transfer Switch (ATS) Controller | generator controller

ComAp ats controller | Automatic Transfer Switch (ATS) Controller | Inteli ATS NT STD panel review
#comap #controller #wiring #diagram

The ComAp ATS (Automatic Transfer Switch) control products are designed to monitor the AC mains supply for under / over voltage, under / over frequency and voltage unbalance and forward a start command on detection of mains supply disproportion.

A transfer switch is an electrical switch that switches a load between two sources. Some transfer switches are manual, in that an operator effects the transfer by throwing a switch, while others are automatic and trigger when they sense one of the sources has lost or gained power.

An Automatic Transfer Switch (ATS) is often installed where a backup generator is located, so that the generator may provide temporary electrical power if the utility source fails.

InteliATS
The ComAp ATS (Automatic Transfer Switch) control products are designed to monitor the AC mains supply for under / over voltage, under / over frequency and voltage unbalance and forward a start command on detection of mains supply disproportion. The family of models provides a wide choice of control features and user configurability options.
InteliATS NT STD
Automatic Transfer Switch (ATS) Controller
Mains monitoring (1 or 3 phases) for under and over voltage, under and over frequency and voltage unbalance
Remote generating set start
Change over for mains and generator contactors
True voltage RMS measurement
Simple Test Run scheduler
2 languages (user changeable)
4 binary inputs
4 binary outputs
Website : https://www.comap-control.com/