How To Replace Inner Tie Rod 1997-04 Dodge Dakota

Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00269

The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 1997-04 Dodge Dakota.

• Check here for more videos on the 1997-2004 Dodge Dakota:    • Плейлист  

This process should be similar on the following vehicles:
1997 Dodge Dakota
1998 Dodge Dakota
1999 Dodge Dakota
2000 Dodge Dakota
2001 Dodge Dakota
2002 Dodge Dakota
2003 Dodge Dakota
2004 Dodge Dakota

Tools you will need:
• 21mm Socket http://1aau.to/oeE/1AXAA00043
• 24mm Socket
• Locking Pliers http://1aau.to/oaf/1AXAA00139
• Pliers
• Torque Wrench http://1aau.to/ogC/1AXAA00044
• 15/16 Inch Wrench
• Liquid Thread Locker
• Painter's Tape
• Rust Penetrant
• Hammer http://1aau.to/ocM/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Dodge Dakota 1997-2004 2nd Generation:    • Dodge Dakota 1997-2004 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.