How to Replace Ignition Coil Control Module 1992-2000 Chevy Tahoe

Buy Now!
New Ignition Control Module from 1AAuto.com https://trq.video/ic-1AECI00228

The ignition coil control module is an integral part of the electronic ignition system of your vehicle. A rough idle, engine misfires, or a check engine light might be signs you need a new one. This video shows you how to install a new ignition coil control module on your 1992-2000 Chevy Tahoe.

• Check here for more videos on the 1992-2000 Chevy Tahoe:    • Chevy Tahoe 1992-2000 1st Generation  

This repair was done on a 1999 Chevrolet Tahoe LT 5.7L and the process should be similar on the following vehicles:
1995 Chevrolet Tahoe
1996 Chevrolet Tahoe
1997 Chevrolet Tahoe
1998 Chevrolet Tahoe
1999 Chevrolet Tahoe
2000 Chevrolet Tahoe

Tools you will need:
• 5.5mm socket
• 8mm Socket https://trq.video/oiF-1AXAA00017
• Socket Driver
• Wire Brush https://trq.video/oaL-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Chevy Tahoe 1992-2000 1st Generation:    • Chevy Tahoe 1992-2000 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.