FIRE FLY JAPAN NAMAZU HOP Install to AEG Chamber system AIRSOFT

We at ORGA AIRSOFT JAPAN.
please check our official Web Site first.
https://orga-airsoft.com/

also dont forget subscribe to our Youtube Channel.
   / orgainc  


|| This Video use following Products ||
Magnus Barrel
https://orga-airsoft.com/products/lis...

Hop Rubber (we are recommend New Hop Rubber )
https://orga-airsoft.com/products/det...


|| To install the Namazu Flat Hop you will need ||

your disassembled hop-up unit
an ORGA Magnus 6.23mm WideBore Barrel
Namazu Flat Hop nub
hop bucking

We will start by placing the Magnus barrel in the hop unit, using the retention C-clip to hold it in place.

Check the hop-up window to make sure it is aligned. Notice that the inner barrel can be seen slightly towards the back of the hop window. We want to make sure that the Namazu doesn't pinch in this area, so we will cut the Namazu down to size.

We are going to want to cut off the two protruding sections, as these can flex when excessive hop is applied, and may pinch in the hop window, preventing the hop from being turned down or off. Use the size of the hop window as a guide when judging how much of the Namazu to cut.

First step is to snip off the two protruding points of the Namazu with your scissors so that is looks similar to this. Then use your cutting knife to remove the excess hop rubber from the back of the Namzu. Your cut should look like this.

Then place the small steel pin into the hole in the center of the Namazu. This helps to prevent side to side movement and helps keep the hop stable. It will also keep the hop rubber from compressing in the center when applying large amounts of hop.

Confirm that the extruding section of the Namazu is at the front. This should be on the opposite side of the hop window, away from any exposed inner barrel.

Next, use a couple small dabs of crazy glue to keep the Namazu securely in place. This helps to prevent hop rubber movement when the hop is applied.

When placing the Namazu in the hop arm, make sure to angle it slightly up. This will ensure that the hop is applied flat when you install it back into the hop unit. If you install the Namazu flat, then it will have a slight downward angle when placed in the hop unit, and hop won't be applied evenly when used.

Reinstall your barrel, making sure to rotate the hop bucking so that the internal grove is off center, leaving a smooth area for the flat hop. If you don't have a Magnus barrel you will need to invert your hop bucking and file down the inner hop ridges.

Confirm your hop is working and install the rest of the hop unit.

【ORGAオフィシャルコンテツ】
ORGA WebShopでは日々新商品や定番品が入荷しています！
最新の入荷情報やトピックスはTwitterでの公開が最速となりますので、是非フォローしておいてください。

ORGA WEB SHOP JAPAN
https://orga-inc.jp/

ORGA Twitter
  / orga_inc  

ORGA Instagram
  / orgaairsoft  

OUTLINE ORGA 公式レビューサイト
https://orga-inc.jp/outline/



【関連コンテンツ】以下、人気のあるエアガンの関連動画です。

Airsoft RPD custom aeg
   • Airsoft RPD custom aeg  

(Airsoft) HK416D Devgru Custom Tokyo Marui
   • (Airsoft) HK416D Devgru Custom Tokyo ...  

Airsoft GI - Modified JG G3 Custom Gun Upgrade Challenge feat. Magicbox, Tienly, Scatterplot, etc.
   • Airsoft GI - Modified JG G3 Custom Gu...  

BUILDING THE ULTIMATE AIRSOFT RIFLE!? | TOKYO MARUI CUSTOM!　
   • BUILDING THE ULTIMATE AIRSOFT RIFLE!?...  

Robo-Airsoft: Robo Gear Review - Z Custom Airsoft Works ZTW M4
   • Robo-Airsoft: Robo Gear Review - Z Cu...  

エアガン レビュー ORGA Youtubeチャンネル
#FireFly #AEG #Airsoft