350z/G35 GKTech Hydraulic Ebrake and Dual Caliper Installation

How To Installation for the GKTech 350z (G35) Hydraulic Handbrake and Dual Caliper Bracket.

Refer to the following locations of the video for specific help:
01:13 Gktech Dual Caliper Bracket Orientation
01:32 Modify Dust Shield for Second Caliper
02:32 Dual Caliper Bracket and Hub Installation
04:54 350z/G35 Ebrake Shoe Installation
07:41 Gktech Hydro Mounting Position
08:29 Oreily's Brake Hardline Extension for Interior Line Route
09:34 Gktech Hydro Brake Line Routing
10:24 Testing Hydro / Street Drift

I personally think the GKTech main brake line from Hydro to brake "T" was too short and left the "T" above the differential input shaft and mounting would likely hit the differential when under load (acceleration). I ran the lines through the interior and extended the line with a 2 foot section of prebuilt 3/16 brake line and junction from Oreily Auto Parts ($15). This allowed for running the line through the trunk and mount the "T" and lines to the calipers above the rear subframe for protection.

If you have any questions feel free to leave a comment or message me on instagram @_freedom.fries_

Enjoy your Hydro Ebrake and the skrrrrt skrrrrts you degenerates.

Freedomfries.tv
@_freedom.fries_