How to 3D print eSUN FOAM ePLA-LW. 3D printed RC plane. Lightweight PLA filament. Rc airplane

ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.

‪@markoroolaid‬
Planes 3D drawings:
https://www.thingiverse.com/thing:483...
https://www.thingiverse.com/thing:483...
RC World of Model - Facebook Group
  / 453983092600613  
Order Link:
https://esun3dstore.com/products/esun...

eSUN FOAM ePLA-LW:
https://www.esun3d.net/products/500.html

Systems: 3s 450mAh battery, multistar 1808-2400kv motor, 5045 propeller, Turnigy™ TGY-D56LV servos, HobbyKing 30A (2~4S) ESC 3A UBEC

Features:




Under the same model and at the same speed, the use of lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight as much as possible can greatly improve the performance of the airplane.

Thank you for watching.

SUBSCRIBE
COMMENT
LIKE
ROOLAID
  / roolaid  
https://grabcad.com/marko.roolaid-1
#RCplane #3dprint #esun