Onstep Goto with Stellarium - Orion optics EQ3 mount

Onstep EXOS EQ3D converted / modified to fit an Orion Optics EQ3 mount.
Brackets were fabricated to fit the stepper motors in place (both attached to the screws which hold the wormgears in place). A 19v 5A power supply was bought from Amazon which powered the onstep device... it was then connected up to my Windows 10 PC on which I had installed both Stellarium and Ascom (which acts as a link between the Telescope, Onstep motor controller unit and Stellarium)

So far so good 👍 👌

Next, I want to install a guide scope and camera on top of the OTA (optical tube assembly)...

But first I'd like to try controlling the Telescope through Bluetooth via the Onstep module.

Check out the next video! 👍🤳🔭
Clear skies!

Jonesy


Https://stellarium.org/

Https://ascom-standards.org/Downloads...