🇬🇧 Royal Enfield Continental GT/Interceptor Meteor 650 How to Valve Adjustment gasket intact easy

This is our 7th video in our series on my 2021 Royal Enfield Continental GT or Interceptor 650 Modifications and maintenance. In this video we will show you how to disassemble your Continental GT or Interceptor step by step and then inspect and adjust your valves without having to remove the valve cover gasket. If you end up removing the gasket then you must reseal the half moon part of the gasket with RTV sealant, our method allows the adjustment without having to remove the factory applied sealant.
The total time required to accomplish this maintenance was 2-2.5 hours from the start of removing the seat to the finish with everything installed and starting up the bike. We hope you enjoy our videos and gain some knowledge and insight into your Enfield and how to mod and maintain it. Thanks again for watching, liking and subscribing.

Patreon--Thanks for the support!!- https://www.patreon.com/user?u=63154053
Clearance as per the manual Intake= .08mm or .003"
Exhaust=.18mm or .007"
Keep the rubber side down!!

#RoyalEnfield #continentalgt650 #interceptor #motorcycles #caferacer #custommotorcycle #theton #tonup