Скачать или смотреть MICHAEL HEIT CALIBRATION OF THE FUEL PROBE.

This video demonstrates the calibration of the fuel probe. I calibrated mine in the tank and it seemed to work ok. The instruction sheet said to do it outside of the tank but so far I can't tell why because mine seems to work fine.

The probe I have has a marking on the top "MAG" and this is where you place a magnet for 2 seconds before you tuen the power on. Hold the magnet in the position marked and remove it in exactly 2 seconds ... then turn the power on to the gage.

This will calibrat the probe to the empty setting; did I mention to do this when the tank is empty?

Turn the pwoer on and the gage will swing over to full, bob around a little, then settle down to the empty mark. That is all there is to it.... this is by far the easiest part of installing the system. Once you get the instructions figured out ...

Soon I'll be ready to start the engine for the first run ... the break in run.

THIS FUEL PROBE & GAGE KIT CAN BE ORDERED FROM AIRCRAFT SPRUCE ON-LINE.