KNX Interface for Paradox Alarm System - Step by Step Tutorial

In today's episode "KNX Interface for Paradox Alarm System - Step by Step Tutorial"
This tutorial is about a KNX Gateway for the Paradox EVO alarm system from Elausys.
To use this KNX Gateway you will need a Paradox Evo Alarm System equipped with PRT3 module for RS232 communication.
The Elausys EVO-KNX Module requires an external 12Volts power supply, which can be provided through the Red-Black connector of PRT3 Interface.
You will also need an RS232 connection between the PRT3 and the EVO-KNX interface, using the provided DB9 connector.

EVO-KNX Interface Official Site : https://elausys.be/products/knx/gatew...

If you want to explore the new features and capabilities of ETS6 please check my step by step tutorial :    • KNX ETS6 Tutorials - New ETS 6.1.0  

If you want to support our Youtube channel :
Become a member of Poseidwn Tech :    / @poseidwntech  
or
If you want to support us and buy us a coffee : https://www.paypal.com/donate?hosted_...

Poseidwn Tech on Social Media:
http://www.poseidwn.tech
  / poseidwn_tech  
  / poseidwn.tech  
  / poseidwn.tech  
  / poseidwntech