59 Ikea VALLHORN motion sensor integration in Home Assistant and direct binding with a LED bulb

HU felirat & EN subtitle!
📺 The Ikea VALLHORN motion sensor is a new product of IKEA's smart home system, which was introduced in 2023. In this video I integrate it with Zigbee Home Automation in Home Assistant.
👉 It can be directly paired with any Zigbee Light device, i.e. it does not require the Ikea DIRIGERA hub and the IKEA Home smart app, nor any other Zigbee coordinator!

🔗 Ikea VALLHORN motion sensor
https://www.ikea.com/gb/en/p/vallhorn...

📘 Ikea VALLHORN motion sensor user manual
Getting started without hub
1. Make sure the smart product you want to connect is installed and powered on.
2. Hold the motion sensor close to the smart product (less than 5 cm away).
3. Press and hold the Pairing button for at least 10 seconds. A red LED will steadily shine under the lens of the motion sensor. The smart product will pulse with a LED once connected.

Good to know
Without DIRIGERA hub or controllers, you can connect a maximum of 10 smart products to one motion sensor.

Buttons on the device:
1. Pairing button
2. On time button: Choose how many minutes the connected lights and plugs will be on.
3: Light and dark mode button: Choose between light and dark mode. In light mode, the detected motion will turn on lights in any surrounding. In the dark mode, the detected motion will turn on the lights only in the dark surrounding.

Factory reset
To reset and remove all connected products, quick-press the Pairing button 4 times (within 5 seconds). Follow steps 1-3 to reconnect your smart products.

💻 The system used for the demonstration:
Synology DS718+, Intel Celeron J3455, 2048 MB, DSM 7.1.1
Docker 20.10.3-1308
Home Assistant SkyConnect Zigbee (EZSP) 7.3.2.0 build 212
Home Assistant Container 2024.2.3 (user interface 20240207.1)