How To Change Your Water Pump Impeller Honda 75/90

*** ALL SCREWS ARE RIGHTY TIGHTY LEFTY LOOSIE *** Due to filming some shots in selfie mode and producing these all on my cell phone some images may be backwards.

Hey everyone today we go over the Honda 75/90 water pump impeller change. I show you how to drop the gear case swap the impeller and put it all back together. With a few tricks along the way I try to make this as painless as possible. Below is a list of tools and part numbers for the water pump service kit you need.
Tools:
Vice Grips, Grease, Rags, Razor Blade, Rubber Mallet, 2 Flat Head Screw Drivers or Small Pry Bars, 6mm Allen Key, 14mm Deep Socket 3/8" Drive and Ratchet. 14mm Combination wrench or Open/Box Ended.
Water Pump Service Kits: ( just impeller, gasket, o-ring and key way)
BF 75/90 AT, AW Early Mercury Case (usually has black paint and metal housing cover)
06192-ZW1-305
BF 75/90 AX DK0-DK2
06192-ZW1-000
BF 75/90 DK4-DK5
06192-ZY9-H00
Full Rebuild Kits with New Housing:
BF 75/90 AT, AW
06193-ZW1-305
BF 75/90 AX
06193-ZW1-B03
BF 75/90 DK0-DK2
06193-ZZ0-000
BF 75/90 DK4-DK5
06193-ZY9-H01
If you have trouble you can refer to Honda Marine's website or boats.net for more info. If you get into trouble you can contact me or take it to your local dealer. If you are under warranty do yourself a favor and have the dealer do the service so you are always covered under that warranty. Good Luck with your impeller change!!!!