Haloview BT 7 side camera trigger installation fix

This video will show a design flaw I found in the Haloview side camera, turn signal trigger feature. I will show you the the issue, as well as how to resolve it and make the turn signal trigger feature operate properly.

UPDATE:

I did run into some issues with the converter being installed in the pin box. when i had my foot on the brake i started to get feed back and the cameras would scan through each camera. I moved the converter back to the front compartment in the fifth wheel and grounded at my ground bus bar near the battery. this solved the problem, now depressing the bake no longer effects the side cameras.my recommendation is to mount the converter on your RV and ground at a solid ground point like the battery or same area on the RV frame as other ground wires

To purchase the BT7 system click the link below
https://www.haloview.com/products/byt...

referral code B31110

Link to the Curt tail light converter
https://www.amazon.com/CURT-56196-2-t...

‪@curtmfg‬
‪@HaloviewTechnology‬
#jonesin2go