How to Replace Engine Knock Sensor 2014-2021 Mazda 6

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-180-aK

This video shows you how to install a new knock sensor in your 2014-2021 Mazda 6. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.

Estimated installation time for a professional technician is approximately: 1 hour 12 minutes

This repair was done on a 2014 Mazda 6 Grand Touring 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2014 Mazda 6
2015 Mazda 6
2016 Mazda 6
2017 Mazda 6
2018 Mazda 6
2019 Mazda 6
2020 Mazda 6
2021 Mazda 6

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obNg-1AXAA00013
• Pry Bar https://trq.video/oacQ-1AXAA00020
• 8mm Wrench https://trq.video/okL-1AXAA00011
• 10mm Socket https://trq.video/obRH-1AXAA00017
• 8mm Socket https://trq.video/obRH-1AXAA00017
• Trim Tool Set https://trq.video/oaDw-1AXXX00006
• Needle nose pliers https://trq.video/oJY-1AXAA00051
• Needle nose pliers https://trq.video/oJY-1AXAA00052
• Ratchet https://trq.video/oci2-1AXAA00016
• Socket Extensions https://trq.video/oci6-1AXAA00015
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oSV-1AXSS00035
• Gloves https://trq.video/obpF-1AXSS00048
• Safety Glasses
• Magnet - Extendable
• Pick https://trq.video/o7w-1AXAA00037
• Razor Blade / Gasket Scraper
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Mazda 6 3rd Generation 2014-2021:    • Mazda 6 3rd Generation 2014-2021  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.