Скачать или смотреть 冷制手工皂丨甜杏橄榄卡通皂型Sweet almond oil&Olive oil Cartoon Design Soap

这支影片后期剪辑了比较久，不想拖拉太长时间，形成倦怠感，但是又担心大家会看不清楚细节步骤，影片下方做了进度条，可以对有兴趣的部分快速定位，配方在视频中可截图保存，有兴趣的可以试试看哦~
总结了一些制作过程的小细节，以下给大家参考~
Tips：
1、对于图案表情或者手势方向有要求的，图案制作的时候要注意反转镜像；
2、画皂的皂液量至少100g，保证可以盖过料理棒刀头；
3、裱花皂液打至美乃滋状态即可，太稀线条容易糊，太浓很难挤均匀；
4、如果有重叠的颜色，先从图案可视的前景画起，例如影片中先画舌头，再堆叠画嘴巴；
5、细尖头棉棒可以调整微小处，且不会伤害硅胶模，很好用；
6、裱画皂的配方水相必须使用全牛奶，因为皂液量很少，牛奶可以在固化时升温提高效率；
7、填模分层的配方，也可以全部使用牛奶冰或纯水冰，我的牛奶冰没有了，所以直接使用牛奶先入油搅拌乳化；
8、影片中的皂厚度约3cm，根据模具的尺寸计算总皂液量，无需填满模。
This film has been edited for a long time in the post production, and I don't want to drag it out for too long, which may cause fatigue. However, I am worried that everyone may not be able to see the detailed steps clearly. Below the film, there is a progress bar that allows you to quickly locate the parts you are interested in. The recipe can be saved by taking screenshots in the video. If you are interested, you can give it a try~
Summarized some small details of the production process, below for your reference~
Tips：
1. For those who have requirements for pattern expression or gesture direction, attention should be paid to reversing the mirror image when making the pattern;
2. The amount of soap used for drawing should be at least 100g, ensuring that it can cover the tip of the cooking stick;
3. Brush the piping soap until it reaches the mayonnaise state. Lines that are too thin are prone to sticking, while those that are too thick are difficult to squeeze evenly;
4. If there are overlapping colors, start from the visible foreground of the pattern, for example, in the movie, draw the tongue first, and then stack and draw the mouth;
5. The fine pointed cotton swab can adjust small parts without damaging the silicone mold, making it very easy to use;
6. The formula for mounting soap must use whole milk as the amount of soap solution is small, and milk can be heated up during solidification to improve efficiency;
7. The formula for filling and layering molds can also be made entirely with milk ice or pure water ice. My milk ice is no longer available, so I directly use milk to mix and emulsify with oil first;
8. The thickness of the soap in the film is about 3cm, and the total amount of soap liquid is calculated based on the size of the mold, without filling the mold.