Cleaning Clogged HP print head 8600 ,8610 WORKS! Part 1

It's quite annoying and expensive when your print head is clogged . Print quality deteriorates and using the Clean Print Head tool does nothing. I've tried a few of the other methods and they don't work. Using a waterpix does work as it applies a nice steady stream of water through the jets. If you don't have a waterpix you can use a large syringe , fill it with water and apply water through the jets. Be careful as if you use to much pressure you can blow off the plastic cap on the ink reservoirs. I know because I did it. To much pressure is not good. This should save your print head . This method should work on other print heads also

For more detailed information watch Part 2

   • Clean HP 8600,8610 Print Head , Part ...  
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Warning watch this video before attempting to clean your printhead...

Before starting your clean process watch this video 1st to prevent damage to the printhead. If the printhead is plugged and you apply water pressure the pressure will /can blow a hole in the thin membrane plastic and your printhead will be damaged. This video shows how to protect the plastic from a tear. It also shows how to drain the water out of the cartridge after cleaning

   • Watch this before Damaging/Cleaning y...