Kawasaki KRX 1000 G Boost Belt and RCOR Clutch Weights install

Just a normal guy who has never done this giving it his best shot. Seems to have turned out ok. I was going to make it a 2 part but I'm not a Youtube wizard so you get it all in one. I will be doing more videos of the other stuff I have to install (PV3 Tuner, RCOR tender springs and more).

Tools needed for belt:
10mm socket to get cover off
12mm and 10mm sockets to get clutch cage off
gboost belt
spreader bolt
new scotch pad
brake cleaner
clean shop rag
compressor with blow out nozzle

Tools needed for clutch weights:
10mm socket to get cover off
RCOR clutch weight kit with cross and spreader bolt
small flat head screw driver
deep 9mm socket with small extension
small hammer/rubber mallet
snap ring plyers

** Update ** 3/1/22
Finally was able to get it out at test her out! Went to Zona and had a blast in the sand. Did I side by side race with a stock KRX and... I had him out the hole and stayed ahead. On the top end he started catching me. I didn't try for a top speed as I'm not to interested in that but acceleration and throttle was excellent. It will turn these tires as good or better than it did with the stocks. I am very pleased and sasified with my purchase :)