DIY - 3D Printed Z Axis Vertical Stabilizer for Gimbals

I now have a new version of this stabilizer that has at least 40% better stabilization. You can find it here:-
   • Features of Pro 2 Model 4th / 5th Axi...  

I've designed and built a Z axis Vertical Stabilizer for Gimbals that can be 3D printed for free.

This is a how to video stepping you through the simple assembly.

The 3D models are available for free on thingiverse here:-
https://www.thingiverse.com/thing:245...

If you'd like to see the video showcasing the Z Axis Vertical Stabilizer that I 3D printed then check out this link here:-
   • 3D Printed Vertical Z ( 4th ) Axis St...  

The handheld gimbal stabilizer has been one of the most significant game changers for independent filmmakers allowing professional results whilst removing the need for tens of thousands of dollars worth of equipment.

But they still lack one vital ingredient, they don’t stabilize for up and down motion and rely on the filmmakers skill to minimise this motion with their arm.

This up and down vertical motion or Z axis motion isn’t always possible to reduce by hand especially with fast action or walking backwards.

That’s when I decided to build a Z axis stabilizer for handheld gimbals and after a number of design iterations I’m really happy with my Z Axis Gimbal Stabilizer with Fluid Dampening. It takes Gimbal cinematography to that next level.

List of non-printing parts
10 x 1/4 in by 60mm (2.36 in) fully threaded mushroom head bolts
1 x 1/4 in by 25mm (1 in) fully threaded mushroom or round head bolts for upright gimbal screw
1 x 1/4 in by 35mm (1.38 in) fully threaded mushroom or round head bolts for inverted gimbal screw
10 x 1/4 in nuts
2 x 1/4 in wingnuts
2 x extension springs - 5/8 diameter by 3 1/4 in length with 0.072 in wire diameter (15.875mm dia x 82.55mm length x 1.829mm wire dia)
Tube of thick grease - (see DIY video)
two part epoxy glue (Araldite)