How to Build a Lumenier QAV250

Sorry if I missed anything. It's hard to build, film, talk and take pictures at the same time.

I'll show you how to build a Lumenier QAV250 the correct way. See this post to see what I mean. http://fpv-flightclub.com/buy-drone/

Watch part 3 of the build before building. It'll show a easier way to mount the ESCs and motors -    • QAV250 Build Update  

Check out the website to see the correct schematic: http://fpv-flightclub.com/buy-drone/

Chapters:

Intro to parts used: 0:50
QAV250 frame: 11:16
Additional parts used: 16:16
Build schematic: 17:17
Preparing on the ESCs: 21:18
Soldering the ESCs: 26.05
Naze32 orientation: 25:17
ESC signal wire install: 29:15
Install battery cable with wire mesh: 32:35
Solder VBAT: 35:09
Motor wire mesh: 36:04
Motor wire to ESC orientation: 37:46
Solder motor wire to ESC: 39:00
Configure OSDoge 41:38
Connect OSDoge to Naze32: 43:33
Mount Naze32 and OSDoge: 49:00

Parts used in this build

Lumenier QAV250 Carbon Fiber - http://fpv-flightclub.com/product/lum...
Taranis X9D - http://fpv-flightclub.com/product/tar...
FrSky D4R-ii - http://fpv-flightclub.com/product/frs...
Cobra 2204 1960kv - http://fpv-flightclub.com/product/cob...
Naze32 Acro - http://fpv-flightclub.com/product/naz...
DYS BL20A pre-flashed with BlHeli 13.2 with dampen light - http://fpv-flightclub.com/product/bl2...
OSDoge OSD (on screen display, LC filter, 5V for Naze32) - http://fpv-flightclub.com/product/osd...
GemFan 5054 Props - http://fpv-flightclub.com/product/gem...
ImmersionRC 600mw Video Transmitter - http://fpv-flightclub.com/product/imm...
Spironet Antenna - http://fpv-flightclub.com/product/imm...
Sony Super HAD 600tvl Camera - http://fpv-flightclub.com/product/son...
FatShark Dominator V2 - http://fpv-flightclub.com/product/fat...

Soldering vise - http://fpv-flightclub.com/product/vise/

This little $6 tool makes soldering so much easier. Especially when soldering the motor wires to the ESCs: http://www.amazon.com/gp/product/B000...

In an attempt to keep this video under an hour I made a separate post on the OSDoge install and setup: http://fpv-flightclub.com/osdoge-setu...

See this post on how to get CleanFlight and BlHeli Suite (if needed) - http://fpv-flightclub.com/cleanflight...

Check Part 2 of this build -    • How to Setup a QAV250  

Here is a complete parts kit with program backup files - http://fpv-flightclub.com/product/lum...

Custon RTF QAV250 prebuilt - http://fpv-flightclub.com/product/cus...

For everyone asking, this is my watch - http://amzn.to/1MrfP8w

If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)

-------------------------------------

Don't forget to subscribe!

Check out our website - http://fpv-flightclub.com

Like us on FaceBook -   / fpvflightclub  

Follow us on Instagram -   / fpvflightclub